Removal And Installation

SPARK PLUG


Removal and Installation


REMOVAL
1. Remove the engine room cover using power tool. Refer to Service and Repair.
2. Remove the ignition coil. Refer to Removal And Installation.





3. Remove the spark plug using a suitable tool.

CAUTION:
Do not drop or shock it.

INSPECTION AFTER REMOVAL
- Do not use a wire brush for cleaning.





- If the spark plug tip is covered with carbon, spark plug cleaner may be used.
Cleaner air pressure : Less than 588 kPa (5.9 bar, 6 kg/cm2, 85 psi)
Cleaning time : Less than 20 seconds










- Checking and adjusting spark plug gap is not required between change intervals.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Do not drop or shock the spark plug.