Procedure After Replacing ECM

INSPECTION AND ADJUSTMENT


Procedure After Replacing ECM

When replacing ECM, the following procedure must be performed.
1. Perform initialization of NVIS(NATS) system and registration of all NVIS(NATS) ignition key IDs. With Intelligent Key System (With intelligent key system) or Without Intelligent Key System (Without intelligent key system).
2. Perform Testing and Inspection.
3. Perform Testing and Inspection.
4. Perform Throttle Valve Closed Position Learning.
5. [Flexible Fuel Vehicle]
Perform Ethanol Mixture Ratio Adaptation (Flexible Fuel Vehicle).
6. Perform Testing and Inspection.