Removal And Installation

INTAKE MANIFOLD


Removal and Installation


REMOVAL
1. Release fuel pressure. Testing and Inspection.
2. Remove intake manifold collector. Exploded View.
3. Remove fuel tube and fuel injector assembly. Exploded View.





4. Loosen mounting nuts and bolts in the reverse order as shown in the figure to remove intake manifold with power tool.

Arrow Indicates : Engine front

5. Remove gaskets.

CAUTION:
Cover engine openings to avoid entry of foreign materials.

INSTALLATION
Note the following, and install in the reverse order or removal.

Intake Manifold
- If stud bolts were removed, install them and tighten to the specified torque below.

Troque: 10.8 N.m (1.1 kg-m, 8 ft-lb)






- Tighten all mounting nuts and bolts to the specified torque in two or more steps in numerical order shown in the figure.