Clutch

CLUTCH


Description

The clutch operates by the power supplied from the automatic back door control unit. It performs the duty control of the power supply to control the operation speed of the back door.





CLUTCH


Diagnosis Procedure

1.CHECK CLUTCH OUTPUT SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect automatic back door control unit connector and automatic back door unit connector.
3. Check continuity between automatic back door control unit harness connector and automatic back door unit harness connector.





4. Check continuity between automatic back door control unit harness connector and ground.





Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace harness.
2.CHECK CLUTCH
1. Connect automatic back door control unit connector and automatic back door unit connector.
2. Check voltage between automatic back door control unit harness connector and ground.






Is the inspection result normal?
YES - Clutch is OK.
NO - Replace automatic back door control unit. Removal And Installation.