Procedures

SHIFT CONTROL SYSTEM


Checking of A/T Position

With the A/T shift selector lever in the "P" position, turn the ignition switch to the ON position with the engine
OFF.
Confirm that the following conditions apply.
- The A/T shift selector lever can be shifted from the "P" position when the brake pedal is depressed.
- The A/T shift selector lever stops at each position with the feel of engagement when it is moved through all the positions.
- There is no excessive effort, sticking, noise or rattle.
- The actual position of the A/T shift selector lever matches the position shown by the A/T shift selector position indicator and the A/T body.
- The back-up lamps illuminate only when the A/T shift selector lever is placed in the "R" position.
- The back-up lamps do not illuminate when the A/T shift selector lever is pushed against the "R" position when in the "P" or "N" position.
- The engine can only be started with the A/T shift selector lever in the "P" and "N" positions.
- The A/T is locked completely when in the "P" position.