With Intelligent Key System

HAZARD FUNCTION





Description
Perform answer-back for each operation with number of blinks.




Component Function Check
1.CHECK FUNCTION
Check hazard warning lamp "FLASHER" in ACTIVE TEST.
Is the inspection result normal?
YES - Hazard warning lamp circuit is OK.
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK HAZARD SWITCH CIRCUIT
Operate the hazard lights by turning ON the hazard warning switch.
Do the lights operate normally?
YES - Replace the BCM. Refer to BCS for replacement and configuration procedure.
NO - Repair or replace hazard warning switch circuit. Service and Repair.