Spark Plug: Service and Repair

SPARK PLUG


Removal and Installation












REMOVAL
1. Disconnect the harness connector from the ignition coil.
2. Remove ignition coil.

CAUTION:
Do not shock ignition coil.





3. Remove spark plug using suitable tool.

INSPECTION AFTER REMOVAL





- Do not use a wire brush for cleaning.
- If plug tip is covered with carbon, spark plug cleaner may be used.










- Checking and adjusting plug gap is not required between change intervals.

INSTALLATION
Installation is in the reverse order of removal.






CAUTION:
Do not drop or shock spark plug.