Refrigerant Pressure Sensor / Switch: Service and Repair

REFRIGERANT PRESSURE SENSOR


Removal and Installation for Refrigerant Pressure Sensor


REMOVAL
1. Discharge the refrigerant. HFC-134A (R-134A) Service Procedure.





2. Disconnect the refrigerant pressure sensor harness connector and remove the refrigerant pressure sensor from the condenser.

CAUTION:
Be careful not to damage the condenser fins.

INSTALLATION
Installation is in the reverse order of removal. Component.

CAUTION:
- Be careful not to damage the condenser fins.
- Replace the O-ring of the refrigerant pressure sensor with a new one, then apply compressor oil to it for installation.
- After charging refrigerant, check for leaks.