Key Switch (BCM Input)

KEY SWITCH (BCM INPUT)





Diagnosis Procedure
Regarding Wiring Diagram information, [1][2]Electrical Diagrams.
1.CHECK KEY SWITCH INPUT SIGNAL
With CONSULT-III
Check key switch "KEY ON SW" in DATA MONITOR mode with CONSULT-III. CONSULT-III Function.
- When key is inserted to ignition key cylinder:






- When key is removed from ignition key cylinder:






Without CONSULT-III





Check voltage between BCM connector M18 terminal 37 and ground.






Is the inspection result normal?
YES - Key switch (insert) circuit is OK.
NO - GO TO 2
2.CHECK KEY SWITCH (INSERT)
1. Turn ignition switch OFF.
2. Disconnect key switch connector.
3. Check continuity between key switch terminals.











Is the inspection result normal?
YES - Repair or replace harness or fuse.
NO - Replace key switch.