Closed Throttle Position And Wide Open Throttle Position Circuit

CLOSED THROTTLE POSITION AND WIDE OPEN THROTTLE POSITION CIRCUIT





CONSULT-III Reference Value in Data Monitor Mode









Diagnosis Procedure
1.CHECK CAN COMMUNICATION LINE
Perform the self-diagnosis. Diagnosis System (TCM).
Is a malfunction in the CAN communication indicated in the results?
YES - Check CAN communication line. 5AT RE5R05A 5AT RE5R05A 5AT RE5R05A 5AT RE5R05A 5AT RE5R05A.
NO - GO TO 2.
2.CHECK THROTTLE POSITION SIGNAL CIRCUIT
With CONSULT-III
1. Turn ignition switch "ON". (Do not start engine.)
2. Select "ECU INPUT SIGNALS" in "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
3. Depress accelerator pedal and read out the value of "CLSD THL POS" and "W/O THL POS".
OK or NG
OK - INSPECTION END
NG - Check the following. If NG, repair or replace damaged parts.
- Perform the self-diagnosis for "ENGINE" with CONSULT-III.
- Open circuit or short to ground or short to power in harness or connectors.
- Pin terminals for damage or loose connection with harness connector.