Removal And Installation

KEY INTERLOCK CABLE


Removal and Installation


REMOVAL
1. Remove the center console. Exploded View.
2. Remove instrument lower panel LH. Exploded View.





3. Unlock slider from adjuster holder by squeezing lock tabs.
4. Remove casing cap from bracket of shift selector assembly and remove interlock rod from adjuster holder.





5. Remove holder from key cylinder and remove key interlock cable.

INSTALLATION





1. Set key interlock cable to key cylinder and install holder.
2. Turn ignition key to "LOCK" position.
3. Set shift selector to "P" position.





4. Insert interlock rod into adjuster holder.
5. Install casing cap to bracket.
6. Move slider in order to secure adjuster holder to interlock rod.
7. Install instrument lower panel LH. Exploded View.
8. Install the center console. Exploded View.