Component Inspection

WASHER SWITCH


Component Inspection

1. CHECK FRONT WASHER SWITCH





1. Turn the ignition switch OFF.
2. Disconnect combination switch (wiper and washer switch).
3. Check continuity between the combination switch (wiper and washer switch) terminals.











Does continuity exist?
YES - GO TO 2.
NO - Replace combination switch (wiper and washer switch). Service and Repair.
2. CHECK REAR WASHER SWITCH





1. Check continuity between the combination switch (wiper and washer switch) terminals.










Does continuity exist?
YES - Wiper and washer switch is normal.
NO - Replace combination switch (wiper and washer switch). Service and Repair.