Intake Valve Timing Control Solenoid Valve (LH)

INTAKE VALVE TIMING CONTROL

Intake Valve Timing Control Solenoid Valve (LH)


REMOVAL

1.Remove engine room cover using power tool. Service and Repair.
2.Remove air duct and resonator assembly. Removal And Installation.
3.Remove drive belt. Removal and Replacement.
4.Disconnect Intake valve timing control solenoid valve connector (LH).





5.Remove Intake valve timing control solenoid valve (LH) (2) and
O-ring (3) from Intake valve timing control solenoid valve cover (LH) (1).

CAUTION:
Do not reuse O-ring.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Lubricate O-ring with engine oil before installing.
- Do not reuse O-ring.

Intake valve timing control : 9.0 Nm (0.92 kg-m, 80 in-lb)
solenoid valve bolt