Refrigerant Pressure Sensor / Switch: Service and Repair

REFRIGERANT PRESSURE SENSOR

Removal and Installation


REMOVAL

1.Discharge the refrigerant. HFC-134A (R-134A) Service Procedure.





2.Disconnect the refrigerant pressure sensor harness connector and remove the refrigerant pressure sensor from the condenser.

CAUTION:
Be careful not to damage the condenser fins.

INSTALLATION

Installation is in the reverse order of removal.
Component.

CAUTION:
- Be careful not to damage the condenser fins.
- Do not reuse O-rings.
- Apply A/C oil to the O-ring of the refrigerant pressure sensor for installation.
- After charging refrigerant, check for leaks.