Transmission Range Switch

TRANSMISSION RANGE SWITCH

Description

Detects park position condition.


Diagnosis Procedure


1. CHECK PARK POSITION SWITCH POWER SUPPLY

1.Turn ignition switch OFF.
2.Disconnect CVT shift selector connector.
3.Check voltage between CVT shift selector harness connector and ground.





Is the inspection result normal?
YES- GO TO 2.
NO- GO TO 4.

2. CHECK PARK POSITION SWITCH GROUND CIRCUIT

Check continuity between control device connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace harness.

3. CHECK PARK POSITION SWITCH

Check park position switch.
Refer to "Component Inspection" .
Is the inspection result normal?
YES- GO TO 5.
NO- Replace park position switch.

4. CHECK PARK POSITION SWITCH CIRCUIT

1.Disconnect Intelligent Key unit connector.
2.Check continuity between CVT shift selector harness connector and Intelligent Key unit harness connector.





3.Check continuity between Intelligent Key warning buzzer harness connector and ground.





Is the inspection result normal?
YES- Replace Intelligent Key unit. Refer to "Removal and Installation" Removal And Installation.
NO- Repair or replace harness.

5. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END


Component Inspection


1. CHECK PARK POSITION SWITCH

1.Turn ignition switch OFF.
2.Disconnect CVT shift selector connector.
3.Check park position switch.





Is the inspection result normal?
YES- INSPECTION END
NO- Replace park position switch.