Removal And Installation

BCM (BODY CONTROL MODULE)

Removal and Installation


CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description" Additional Service When Replacing Control Unit (BCM).

REMOVAL

1.Remove the glove box assembly. Refer to "Exploded View" Exploded View.
2.Remove the BCM bracket mounting screws.
3.Remove the BCM and disconnect the connector.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- Be sure to perform "WRITE CONFIGURATION" when replacing BCM.
- Be sure to perform the system initialization (NATS) when replacing BCM.
Refer to "CONFIGURATION (BCM) : Work Procedure" Work Procedure.