Removal And Installation

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)

Removal and Installation


CAUTION:
IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.

REMOVAL

1.Remove air duct (inlet). Refer to "Exploded View" Exploded View.
2.Remove battery. Refer to "Exploded View" Exploded View.





3.Remove IPDM E/R (1) while pushing and opening pawls (A).
4.Disconnect connectors from IPDM E/R.
5.Remove fuse and fusible link block cover.





6.Unlock all pawls (A) of IPDM E/R bracket, and remove IPDM E/R bracket (1).
7.Unlock pawls of IPDM E/R cover A, harness cover A and harness cover B, remove them.
8.Disconnect connectors connected to fuse and fusible link block upper side, and remove fuse and fusible link block.





9.Remove IPDM E/R cover B mounting bolts (A) and battery cable fixed clip (B), and remove IPDM E/R cover B (1).

INSTALLATION

Install in the reverse order of removal.