Road Test
ROAD TESTINGDescription
- The purpose of this road test is to determine overall performance of automatic transaxle and analyze causes of problems.
- The road test consists of the following three parts:
1. Check before engine is started
2. Check at idle
3. Cruise test
- Before road test, familiarize yourself with all test procedures and items to check.
- Conduct tests on all items. Troubleshoot items which check out No Good after road test. Refer to Self-diagnosis" and "Diagnostic Procedure".
1. Check before engine is started.
Part 1:
Part 2:
2. Check at idle.
Part 1:
Part 2:
3. Cruise test.
- Check all items listed in Parts 1 through 3.
- Throttle position can be controlled by voltage across terminals (34) and (35) of A/T control unit.
Cruise Test - Part 1
Cruise Test - Part 1 (a):
Cruise Test Part - 1 (b):
Cruise Test - Part 2
Cruise Test - Part 2:
Cruise Test - Part 3
Cruise Test - Part 3:
Shift schedule (Power pattern)
Shift Schedule (Power Pattern):
Shift schedule (Comfort pattern)
Shift Schedule (Comfort Pattern):
