Without Scan Tool

Diagnostic Procedure Without CONSULT-II

For a Description of Scan Tool Procedures, please

TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)
1. CHECK A/T CHECK (POSITION) INDICATOR LAMP





1. Move selector lever to P position. Start engine and warm it up to normal engine operating temperature.
2. Turn ignition switch to OFF position.
3. Wait 5 seconds.
4. Turn ignition switch to ON position.
(Do not start engine.)





5. Does A/T check (position) indicator lamp come on for about 2 seconds?
Yes or No
Yes >>GO TO 2.
No >>Stop procedure. Perform "1.A/T Check (Position) Indicator Lamp Does Not Come On" before proceeding.

2. JUDGEMENT PROCEDURE STEP 1
1. Turn ignition switch to OFF position.
2. Turn ignition switch to ON position. (Do not start engine.)





3. Depress the brake pedal, then move gear selector lever from P to D position.
4. Wait 3 seconds.





5. Move selector lever to 2 position.
6. Release brake pedal.
>>GO TO 3.

3. JUDGEMENT PROCEDURE STEP 2
1. Move selector lever to 1 position.
2. Depress brake pedal.
3. Depress accelerator pedal fully and release it.





4. The A/T check (position) indicator lamp will begin to flash.
>>GO TO 4.

4. CHECK SELF-DIAGNOSTIC CODE





Check A/T check (position) indicator lamp.
Refer to "JUDGEMENT OF SELF-DIAGNOSIS CODE".
>>DIAGNOSIS END











JUDGEMENT OF SELF-DIAGNOSIS CODE