P0755
DTC P0755 SHIFT SOLENOID VALVE BDescription
Shift solenoid valves A and B are turned ON or OFF" by the TCM in response to signals sent from the Park/Neutral Position (PNP) switch, vehicle speed and electric throttle control actuator (throttle position sensors). Gears will then be shifted to the optimum position.
TCM TERMINALS AND REFERENCE VALUE
Remarks: Specification data are reference values.
Diagnostic Trouble Code (DTC) Confirmation Procedure
CAUTION: Always drive vehicle at a safe speed.
NOTE: If "DTC Confirmation Procedure" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
After the repair, perform the following procedure to confirm the malfunction is eliminated.
WITH CONSULT-II
1. Turn ignition switch ON and select "DATA MONITOR" mode for "ENGINE" with CONSULT-II.
2. Start engine.
3. Drive vehicle in D position and allow the transmission to shift 1 - 2 - 3 ("GEAR").
WITH GST
Follow the procedure "With CONSULT-II".
Wiring Diagram
AT-SSV/B-01:
Diagnostic Procedure
1 Of 5:
2 Of 5:
3 Of 5:
4 Of 5:
5 Of 5:
