Headlamp Bulb: Service and Repair

(FOR USA/CANADA)

Bulb Replacement

CAUTION:
- After replacing a new xenon bulb, be sure to make aiming adjustments.
- Hold only the plastic base when handling the bulb. Never touch the glass envelope.
- Do not leave headlamp reflector without bulb for a long period of time. Dust, moisture, smoke, etc. entering head lamp body may affect the performance of the headlamp Remove headlamp bulb from the headlamp reflector just before a replacement bulb is installed.

1. Disconnect negative battery cable.
2. Disconnect headlamp connector.


WARNING: Never service a xenon headlamp without disconnecting negative battery cable and with wet hands.

XENON BULB (LOW BEAM)




1. Remove headlamp seal cover by turning it counterclockwise.




2. Turn bulb socket counterclockwise with keep pushing, then remove it.




3. Release retaining pin.
4. Remove the xenon bulb.
5. Install in the reverse order of removal.

CAUTION:
- When disposing of the xenon bulb, do not break it; always dispose of it as is.
- Make sure to install the bulb securely; if the xenon bulb is improperly installed in its socket, high-tension current leaks occur. This may lead to a melted bulb and/or bulb socket.




HIGH BEAM
1. Turn the bulb clockwise (LH high beam) or counterclockwise (RH high beam).
2. Remove the bulb.
3. Install in the reverse order of removal.