DTC 52

Inspection 4: Vehicle Speed Signal

MALFUNCTION CODE NO. 52
1. CHECK SELF-DIAGNOSTIC RESULTS
1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn the ignition switch ON.
2. Select "START (NISSAN BASED VHCL)".
3. Select "BCM" on "SELECT SYSTEM" screen.

NOTE: If "BCM" is not indicated, go to GI-39. "CONSULT-II Data Link Connector (DLC) Circuit". CONSULT-II Checking System

4. Select "BCM C/U" on "SELECT SYSTEM" screen.
5. Select "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
6. Check display contents in self-diagnostic results.

Is "CAN COMM CIRCUIT" displayed in the self-diagnosis display items?
YES >> Malfunction in CAN communication system. GO TO LAN-3, "Precautions When Using CONSULT-II". Precautions When Using CONSULT-II
NO >> No malfunction. Check combination meter.