Diagnostic Procedure 6

Trouble Diagnosis without CONSULT-II

DIAGNOSTIC PROCEDURE 6

Inspecting SRS Malfunctioning Parts by Using "AIR BAG" Warning Lamp - Diagnosis Mode

NOTE: SRS will not enter Diagnosis mode if no malfunction is detected in User mode.

1. Turn ignition switch ON.
2. After "AIR BAG" warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
3. Wait more than 3 seconds.
4. Repeat the steps 1 to 3 two times.
5. Turn ignition switch ON.

SRS is now in Diagnosis mode. "AIR BAG" warning lamp operates in Diagnosis mode as shown.

Part 1:

Part 2:

Part 3:

Part 4:

WARNING LAMP FLASH CODE CHART