Shift Cable: Service and Repair

CONTROL CABLE





Removal and Installation

REMOVAL
1. Shift control lever to "P".
2. Remove the air cleaner assembly.
3. Remove the control cable nut and control cable form the manual lever.
4. Remove the lock plate and the control cable from the brackets.
5. Remove the center console.
6. Remove the HV ECU and bracket covering the retainer grommet.
7. Remove the retainer grommet bolts and the retainer grommet.
8. Remove the control cable from the control device assembly.
9. Remove the control cable from the vehicle.

INSTALLATION
Installation is in the reverse order of removal.
^ When installing the control cable to the control device assembly, make sure that the control cable socket is fully pressed into the control device assembly, and the control cable end is fully pressed in with the ribbed surface facing upward.
^ After installation is complete, adjust and check the transaxle position. Refer to TM-25, "Inspection and Adjustment". Testing and Inspection