C1607

DTC C1607 EEPROM

DIAGNOSTIC PROCEDURE

1. PERFORM SELF-DIAGNOSIS

With CONSULT-III
1. Turn ignition switch "ON". (Do not start engine.)
2. Select "SELF-DIAG RESULTS" mode for "EPS" with CONSULT-III.
3. Touch "ERASE".
4. Turn ignition switch "OFF", and wait at least 10 seconds.
5. Start engine.
6. Perform the self-diagnosis again.
Is the "EEPROM [C1607]" displayed?
YES >> Replace EPS control unit.
NO >> INSPECTION END