Cruise Test

Cruise Test

1. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 1
1. Drive vehicle for approximately 10 minutes to warm engine oil and CVT fluid up to operating temperature.
CVT fluid operating temperature: 50 - 80 Degrees C (122 - 176 Degrees F)
2. Park vehicle on flat surface.
3. Move selector lever to "P" position.
4. Start engine.
5. Move selector lever to "L" position.





6. Accelerate vehicle to 2/8-way throttle depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-45, "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 2.
NG >> Mark the box of CVT-157, "Vehicle Speed Does Not Change in "L" Position" on the CVT-30, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Continue "Road Test".

2. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 2
1. Park vehicle on flat surface.
2. Move selector lever to "D" position.
3. Push overdrive control switch. (O/D OFF indicator lamp is on.)





4. Accelerate vehicle to 2/8-way throttle depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-45, "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 3.
NG >> Mark the box of CVT-158, "Vehicle Speed Does Not Change in overdrive-off mode" on the CVT-30, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Continue "Road Test".

3. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 3
1. Park vehicle on flat surface.
2. Move selector lever to "D" position.
3. Push overdrive control switch. (O/D OFF indicator lamp is off.)





4. Accelerate vehicle to 2/8-way throttle depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-45, "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 4.
NG >> Mark the box of CVT-159, "Vehicle Speed Does Not Change in "D" Position" on the CVT-30, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Continue "Road Test".

4. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 4
1. Park vehicle on flat surface.
2. Move selector lever to "L" position.





3. Accelerate vehicle to full depression depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-45, "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 5.
NG >> Mark the box of CVT-157, "Vehicle Speed Does Not Change in "L" Position" on the CVT-30, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Continue "Road Test".

5. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 5
1. Park vehicle on flat surface.
2. Move selector lever to "D" position.
3. Push overdrive control switch. (O/D OFF indicator lamp is on.)





4. Accelerate vehicle to full depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-45, "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 6.
NG >> Mark the box of CVT-158, "Vehicle Speed Does Not Change in overdrive-off mode" on the CVT-30, "How to Perform Trouble Diagnosis for Quick and Accurate Repair Continue "Road Test".

6. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 6
1. Park vehicle on flat surface.
2. Move selector lever to "D" position.
3. Push overdrive control switch. (O/D OFF indicator lamp is off.)





4. Accelerate vehicle to full depression depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-45, "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 7.
NG >> Mark the box of CVT-159, "Vehicle Speed Does Not Change in "D" Position" on the CVT-30, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Continue "Road Test".

7. CHECK ENGINE BRAKE FUNCTION - PART 1
1. Release accelerator pedal.
2. Check engine brake. (O/D OFF indicator lamp is off.)
Does engine braking effectively reduce speed in "D" position?
YES >> GO TO 8.
NO >> Mark the box of CVT-159, "Vehicle Does Not Decelerate by Engine Brake" on the CVT-30, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Continue "Road Test".

8. CHECK ENGINE BRAKE FUNCTION - PART 2
1. Push overdrive control switch. (O/D OFF indicator lamp is on.)
2. Check engine brake.
Does engine braking effectively reduce speed in "D" position?
YES >> GO TO 9.
NO >> Mark the box of CVT-159, "Vehicle Does Not Decelerate by Engine Brake" on the CVT-30, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Continue "Road Test".

9. CHECK ENGINE BRAKE FUNCTION - PART 3
1. Move selector lever to "L" position.
2. Check engine brake.
Does engine braking effectively reduce speed in "L" position?
YES >> 1. Stop the vehicle.
2. Perform self-diagnosis. Refer to CVT-47, "CONSULT-III Function (TRANSMISSION)". Consult-III Function (Transmission)
NO >> Mark the box of CVT-159, "Vehicle Does Not Decelerate by Engine Brake" on the CVT-30, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Then continue trouble diagnosis.