Diagnosis Procedure
BACK DOOR REQUEST SWITCH
Description
Transmits lock/unlock operation to BCM.
BACK DOOR REQUEST SWITCH
Diagnosis Procedure
1.CHECK BACK DOOR REQUEST SWITCH INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect back door opener switch assembly.
3. Check signal between back door opener switch assembly harness connector and ground using oscilloscope.
Is the inspection result normal?
YES - GO TO 3.
NO - GO TO 2.
2.CHECK BACK DOOR REQUEST SWITCH CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between BCM harness connector and back door opener switch assembly harness connector.
3. Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES - Replace BCM. Refer to Removal And Installation.
NO - Repair or replace harness.
3.CHECK BACK DOOR REQUEST SWITCH GROUND CIRCUIT
Check continuity between back door request switch assembly harness connector and ground.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace harness.
4.CHECK BACK DOOR REQUEST SWITCH
Refer to Component Inspection.
Is the inspection result normal?
YES - GO TO 5.
NO - Replace back door opener switch assembly. Refer to Removal And Installation.
5.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- INSPECTION END