System Description

SHIFT PATTERN CONTROL


MANUAL MODE : System Description


INPUT/OUTPUT SIGNAL CHART






SYSTEM DESCRIPTION

Manual Mode
- The TCM receives the manual mode signal, not manual mode signal, manual mode shift up signal, manual mode shift down signal, paddle shifter shift up signal and paddle shifter shift down signal from combination meter via CAN communication line. The TCM shifts shift pattern control to the manual mode based on these signals, and then shifts the A/T by operating each solenoid valve according to the shift operation of the driver.
- The TCM prohibits the manual mode while being in fail-safe mode due to an A/T malfunction, etc. Refer to Fail-Safe.