Procedures

WHEEL SENSOR


Inspection


INSPECT FRONT WHEEL SENSOR
1. Inspect the front wheel sensor. If any of the following occurs, replace the front wheel sensor with a new one:
- The surface of the front wheel sensor is cracked, dented, or chipped off.
- The connector or wire harness is scratched, cracked, or damaged.
- The front wheel sensor has been dropped.
2. Measure the resistance according to the value(s) in the table below.











If the value is not as specified, replace the front wheel sensor.

INSPECT REAR WHEEL SENSOR
1. Inspect the rear wheel sensor. If any of the following occurs, replace the rear wheel sensor with a new one:
- The surface of the rear wheel sensor is cracked, dented, or chipped off.
- The connector is scratched, cracked, or damaged.
- The skid control sensor has been dropped.
2. Measure the resistance to the value(s) in the table below.











If the value is not as specified, replace rear wheel sensor.