Refrigerant Pressure Sensor / Switch: Service and Repair

REFRIGERANT PRESSURE SENSOR


Removal and Installation for Refrigerant Pressure Sensor


REMOVAL
1. Discharge the refrigerant. Refer to Refrigeration System.
2. Remove the front grille. Refer to Service and Repair.





3. Disconnect the refrigerant pressure sensor connector and remove the refrigerant pressure sensor (1) from the liquid tank on the radiator, condenser and liquid tank assembly.

CAUTION:
Do not damage the radiator, condenser and liquid tank assembly fins.

INSTALLATION
Installation is in the reverse order of removal. Refer to Component.

CAUTION:
Replace the O-ring of the refrigerant pressure sensor with a new one, then apply electric compressor oil to it when installing it.