Power Distribution Module: Service and Repair

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)


Removal and Installation


REMOVAL
1. Disconnect the 12-volt battery cable from the negative terminal.







2. Remove the IPDM E/R cover (1) while pressing the pawl (A) at the rear end of the IPDM E/R cover (1).







3. Disconnect the harness connectors from the IPDM E/R.







4. While depressing the tabs (A) remove the IPDM E/R (1) from the vehicle.

INSTALLATION
Installation is in the reverse order of removal.