Alternator: Service and Repair

CHARGING SYSTEM


Removal and Installation







REMOVAL
1. Disconnect the battery negative terminal. Refer to Removal and Replacement.
2. Remove drive belt. Refer to Component.
3. Disconnect generator connector.
4. Remove "B" terminal nut.
5. Remove generator bolts.
6. Remove generator assembly from the vehicle.

GENERATOR PULLEY INSPECTION
- Check that the generator pulley does not rattle.
- Check that the generator pulley nut is properly tightened.

Generator pulley nut : 118 N-m (12.0 kg-m, 87 ft-lb)

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Be sure to tighten "B" terminal nut carefully.