Operation CHARM: Car repair manuals for everyone.

Shifter A/T: Testing and Inspection





SHIFT CONTROL SYSTEM


Checking of A/T Position

1. Place selector lever in "P" position, and turn ignition switch ON (Do not start engine).
2. Make sure selector lever can be shifted to other than "P" position when brake pedal is depressed. Also make sure selector lever can be shifted from "P" position only when brake pedal is depressed.
3. Move selector lever and check for excessive effort, sticking, noise or rattle.
4. Confirm selector lever stops at each position with the feel of engagement when it is moved through all the positions. Check whether or not the actual position selector lever is in matches the position shown by the shift position indicator and the transaxle.





5. The method of operating selector lever to individual positions correctly should be as shown.
- (A): Press selector button to operate selector lever, while depressing the brake pedal.
- (B): Press selector button to operate selector lever.
- (C): Selector lever can be operated without pressing selector button.
6. Confirm back-up lamps illuminate only when selector lever is placed in "R" position. Confirm back-up lamps do not illuminate when selector lever is in "P" or "N" position even if it is pushed toward "R" position without pressing selector button.
7. Confirm engine can only be started with selector lever in "P" and "N" positions.
8. Make sure A/T is locked completely in "P" position.