Removal and Installation

CSC (CONCENTRIC SLAVE CYLINDER)


Removal and Installation


REMOVAL
1. Remove transaxle assembly. Refer to Removal and Replacement (HR16DE models), Removal and Replacement (MR18DE models).





2. Remove CSC bolts and the CSC from clutch housing.

INSTALLATION
1. Install CSC to clutch housing and then tighten bolts to specification. Refer to Disassembly And Assembly.

CAUTION:
- Do not reuse CSC.
- Do not insert and operate CSC because piston and stopper of CSC components may fall off.
2. Install transaxle assembly. Refer to Removal and Replacement (HR16DE models), Removal and Replacement (MR18DE models).
3. Bleed the air from the clutch hydraulic system. Refer to Service and Repair.