Cruise Test - Part 3
TROUBLE DIAGNOSIS
Cruise Test - Part 3
1.CHECK SHIFT-DOWN (D4 TO D3 )
1. Push overdrive control switch. (OD OFF indicator lamp is off.)
2. Move selector lever to "D" position.
3. Accelerate vehicle using half throttle to D4 .
4. Release accelerator pedal.
5. Push overdrive control switch. (OD OFF indicator lamp is on.)
Read gear position and vehicle speed. Refer to CONSULT-III Function (A/T) .
Does A/T shift from D4 to D3 (OD OFF)?
YES >> GO TO 2.
NO >> � Mark the box on the "Diagnostic Worksheet Chart".
- Go to A/T Does Not Shift- D4 To D3, When OD OFF
- Continue "Road Test".
2.CHECK ENGINE BRAKE
Check engine brake.
Does vehicle decelerate by engine brake?
YES >> GO TO 3.
NO >> � Mark the box on the "Diagnostic Worksheet Chart".
- Go to Vehicle Does Not Decelerate By Engine Brake .
- Continue "Road Test".
3.CHECK SHIFT-DOWN (D3 TO 22 )
Move selector lever from "D" to "2" position while driving in D3 (OD OFF).
Read gear position. Refer to CONSULT-III Function (A/T) .
Does A/T shift from D3 (OD OFF) to 22 ?
YES >> GO TO 4.
NO >> � Mark the box on the "Diagnostic Worksheet Chart".
- Go to D" to "2" Position" .
- Continue "Road Test".
4.CHECK ENGINE BRAKE
Check engine brake.
Does vehicle decelerate by engine brake?
YES >> GO TO 5.
NO >> � Mark the box on the "Diagnostic Worksheet Chart".
- Go to Vehicle Does Not Decelerate By Engine Brake .
- Continue "Road Test".
5.CHECK SHIFT-DOWN (22 TO 11 )
Move selector lever from "2" to "1" position while driving in 22 .
Read gear position. Refer to CONSULT-III Function (A/T) .
Does A/T shift from 22 to 11 position?
YES >> GO TO 6.
NO >> � Mark the box on the "Diagnostic Worksheet Chart".
- Go to 2" to "1" Position" .
- Continue "Road Test".
6.CHECK ENGINE BRAKE
Check engine brake.
Does vehicle decelerate by engine brake?
YES >> 1. Stop vehicle.
2. Perform self-diagnosis, Diagnosis Procedure Without CONSULT-III .
NO >> � Mark the box on the "Diagnostic Worksheet Chart".
- Go to Vehicle Does Not Decelerate By Engine Brake .
- Stop "Road Test".