Front Power Window Motor RH Circuit Inspection

POWER WINDOW SYSTEM


Front Power Window Motor RH Circuit Inspection

1.CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH OUTPUT SIGNAL





1. Turn ignition switch OFF.
2. Disconnect front power window motor RH.
3. Turn ignition switch ON.
4. Check voltage between front power window motor RH connector and ground.





OK or NG
OK >> Replace front power window motor RH. Refer to Removal And Installation .
NG >> GO TO 2.
2.CHECK FRONT POWER WINDOW MOTOR RH CIRCUIT





1. Turn ignition switch OFF.
2. Disconnect power window and door lock/unlock switch RH.
3. Check continuity between rear power window switch RH connector D105 (A) terminals 6, 7 and rear power window motor RH connector D104 (B) terminals 1, 2.






4. Check continuity between power window and door lock/unlock switch RH connector D105 (A) terminals 6, 7 and ground.






OK or NG
OK >> GO TO 3.
NG >> Repair or replace harness.
3.CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH





1. Disconnect power window and door lock/unlock switch RH.
2. Check continuity between power window and door lock/unlock switch RH terminals.





OK or NG
OK >> GO TO 4.
NG >> Replace power window and door lock/unlock switch RH. Refer to Removal and Installation .
4.CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH CIRCUIT





1. Disconnect main power window and door lock/unlock switch.
2. Check continuity between power window main switch connector and power window and door lock/unlock switch RH connector.






3. Check continuity power window main switch connector and ground.





OK or NG
OK >> Replace main power window and door lock/unlock switch. Refer to Removal and Installation .
NG >> Repair or replace harness.