Coupe

POWER WINDOW MOTOR


DRIVER SIDE : Description

Door glass moves UP/DOWN by receiving the signal from power window main switch.





POWER WINDOW MOTOR


DRIVER SIDE : Diagnosis Procedure

1.CHECK POWER WINDOW MAIN SWITCH OUTPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect driver side power window motor connector.
3. Turn ignition switch ON.
4. Check voltage between driver side power window motor harness connector and ground.





Is the measurement value within the specification?
YES - GO TO 2.
NO - GO TO 3.
2.CHECK POWER WINDOW MOTOR
Check driver side power window motor. Coupe.
Is the inspection result normal?
YES - GO TO 4.
NO - Replace driver side power window motor. Removal And Installation.
3.CHECK POWER WINDOW MOTOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect power window main switch connector.
3. Check continuity between power window main switch harness connector and driver side power window motor harness connector.





4. Check continuity between power window main switch harness connector and ground.





Is the inspection result normal?
YES - Replace power window main switch. Coupe.
NO - Repair or replace harness.
4.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END