LH Only Window Anti-Pinch

POWER WINDOW MOTOR


DRIVER SIDE : Description

Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch.





POWER WINDOW MOTOR


DRIVER SIDE : Diagnosis Procedure

Regarding Wiring Diagram information, LH Only Window Anti-Pinch.

Front Power Window Motor LH Circuit Check
1. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL
1. Turn ignition switch OFF.





2. Disconnect front power window motor LH.
3. Turn ignition switch ON.
4. Check voltage between front power window motor LH connector and ground.







Is the measurement value within the specification?
YES - GO TO 3
NO - GO TO 2
2. CHECK HARNESS CONTINUITY





1. Turn ignition switch OFF.
2. Disconnect main power window and door lock/unlock switch.
3. Check continuity between main power window and door lock/unlock switch connector (A) and front power window motor LH connector (B).






4. Check continuity between main power window and door lock/unlock switch connector (A) and ground.





Is the inspection result normal?
YES - Replace main power window and door lock/unlock switch. LH Only Window Anti-Pinch. After that, LH Only Window Anti-Pinch.
NO - Repair or replace harness.
3. CHECK FRONT POWER WINDOW MOTOR LH
Check front power window motor LH. LH&RH Front Window Anti-Pinch.
Is the inspection result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - Replace front power window motor LH. Removal And Installation. After that, LH Only Window Anti-Pinch.