LH&RH Front Window Anti-Pinch

POWER WINDOW MOTOR


PASSENGER SIDE : Description

Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or power window and door lock/unlock switch RH.





POWER WINDOW MOTOR


PASSENGER SIDE : Diagnosis Procedure

Regarding Wiring Diagram information, LH&RH Front Window Anti-Pinch.

Front Power Window Motor RH Circuit Check
1. CHECK FRONT POWER WINDOW SWITCH RH OUTPUT SIGNAL
1. Turn ignition switch OFF.





2. Disconnect front power window motor RH.
3. Turn ignition switch ON.
4. Check voltage between front power window motor RH connector and ground.





Is the measurement value within the specification?
YES - GO TO 3
NO - GO TO 2
2. CHECK HARNESS CONTINUITY





1. Turn ignition switch OFF.
2. Disconnect power window and door lock/unlock switch RH.
3. Check continuity between power window and door lock/unlock switch RH connector (A) and front power window motor RH connector (B).






4. Check continuity between power window and door lock/unlock switch RH connector (A) and ground.





Is the inspection result normal?
YES - Replace power window and door lock/unlock switch RH. LH Only Window Anti-Pinch. After that, Front Power Window Switch.
NO - Repair or replace harness.
3. CHECK FRONT POWER WINDOW MOTOR RH
Check front power window motor RH. LH&RH Front Window Anti-Pinch.
Is the inspection result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - Replace front power window motor RH. Removal And Installation. After that, Passenger Side.