Coupe

REAR PARCEL SHELF FINISHER


Removal and Installation


REMOVAL
1. Remove rear seat cushion. Refer to Coupe
2. Remove rear lower finisher RH/LH. Refer to Coupe.
3. Remove rear pillar finisher RH/LH. Refer to Coupe.
4. Remove upper pillar finisher RH/LH. Refer to Coupe.
5. Remove the clips, then remove rear seatback latch cover.
6. Remove high mounted stop lamp. Refer to Service and Repair.
7. Remove the clips, then remove rear parcel shelf finisher.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Make sure that clips are fully aligned with panel holes on body when installing, then press them in completely.