Removal And Installation

CVT SHIFT SELECTOR


Removal and Installation


REMOVAL
1. Remove the center console assembly. Refer to Removal And Installation.
2. Disconnect the control cable from the CVT shift selector assembly.
3. Disconnect the CVT shift selector harness connector from the CVT shift selector assembly.
4. Remove the CVT shift selector assembly bolts and the CVT shift selector assembly.

INSTALLATION
Installation is in the reverse order of removal.
- When installing the control cable to the CVT shift selector assembly, make sure that the control cable is fully pressed in with the ribbed surface facing upward.
- After installation is completed, adjust and check CVT position. Refer to CVT RE0F10A.