LH & RH Front Anti-Pinch-Coupe
POWER WINDOW MOTOR
PASSENGER SIDE : Description
Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or power window and door lock/unlock switch RH.
POWER WINDOW MOTOR
PASSENGER SIDE : Diagnosis Procedure
Regarding Wiring Diagram information, refer to Power Window System - With Left And Right Power Window Anti-Pinch.
Power Window Motor RH Circuit Check
1. CHECK POWER WINDOW SWITCH RH OUTPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect power window motor RH.
3. Turn ignition switch ON.
4. Check voltage between power window motor RH connector and ground.
Is the measurement value within the specification?
YES - GO TO 3
NO - GO TO 2
2. CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect power window and door lock/unlock switch RH.
3. Check continuity between power window and door lock/unlock switch RH connector (A) and power window motor RH connector (B).
4. Check continuity between power window and door lock/unlock switch RH connector (A) and ground.
Is the inspection result normal?
YES - Replace power window and door lock/unlock switch RH. Refer to LH & RH Front Anti-Pinch-Coupe. After that, refer to Power Supply And Ground Circuit.
NO - Repair or replace harness.
3. CHECK POWER WINDOW MOTOR RH
Check power window motor RH. Refer to LH & RH Front Anti-Pinch-Coupe.
Is the inspection result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - Replace power window motor RH. Refer to Removal and Installation. After that, refer to LH & RH Front Anti-Pinch-Coupe.