With Navigation

REAR VIEW CAMERA


Removal and Installation


REMOVAL
1. Remove the license plate finisher. Refer to (coupe) and (sedan).
2. Remove trunk lid finisher. Refer to Coupe.
3. Remove the rear view camera by performing the following:





- For coupe models, release the clip (A), then pull out the rear view camera connector, disconnect the rear view camera connector, press the rear view camera tab (B) and remove the rear view camera (1).





- For sedan models, disconnect the rear view camera connector
(B), press the rear view camera tab (A) and remove the rear view camera (1).

INSTALLATION
Installation is in the reverse order of removal.