Base Audio

AUDIO UNIT


Removal and Installation


REMOVAL
1. Disconnect the negative battery terminal.
2. Remove the center ventilator grilles. Refer to Center Ventilator Grilles.
3. Remove the storage bin. Refer to Removal And Installation.
4. Remove the cluster lid D. Refer to Removal And Installation.





5. Remove the audio unit upper and lower screws (A).
6. Pull out the audio control unit assembly, disconnect the audio control unit connectors.
7. Disconnect the front air control unit connector.





8. Remove the cluster lid C screws (A), then remove the audio unit screws (B) and the audio unit (1).
9. Remove the audio unit bracket screws, then remove the front air control unit screws and remove the audio unit brackets.

INSTALLATION
Installation is in the reverse order of removal.