Removal And Installation For Junction Pipe

HIGH-PRESSURE PIPE


Removal and Installation for Junction Pipe


REMOVAL
1. Discharge the refrigerant. Refer to HFC-134A (R-134A) Service Procedure.
2. Remove the front air duct. Refer to (QR25DE), Service and Repair (VQ35DE).
3. Remove the front grille. Refer to Coupe.
4. Remove the junction pipe. Refer to Component.

CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Replace the O-ring of the junction pipe with a new one, then apply compressor oil to it when installing it.
- After charging the refrigerant, check for leaks. Refer to Checking Of Refrigerant Leaks.