LH Only Anti-Pinch-Sedan

POWER SUPPLY AND GROUND CIRCUIT


REAR POWER WINDOW SWITCH : Description

- BCM supplies power.
- Rear power window motor will be operated if rear power window switch is operated. Rear power window switch.





POWER SUPPLY AND GROUND CIRCUIT


REAR POWER WINDOW SWITCH : Diagnosis Procedure

Regarding Wiring Diagram information, refer to Power Window System - With Left And Right Front Power Window Anti-Pinch.

Rear Power Window Switch Power Supply Circuit Check
1. CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch ON.





2. Check voltage between rear power window switch connector and ground.





Is the measurement value within the specification?
YES - GO TO 2 (Rear power window switch LH)
YES - GO TO 3 (Rear power window switch RH)
NO - GO TO 4
2. CHECK HARNESS CONTINUITY (REAR POWER WINDOW SWITCH LH)





1. Turn ignition switch OFF.
2. Disconnect main power window and door lock/unlock switch and rear power window switch LH.
3. Check continuity between main power window and door lock/unlock switch connector (A) and rear power window switch LH connector (B).






4. Check continuity between main power window and door lock/unlock switch connector (A) and ground.





Is the inspection result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - Repair or replace harness.
3. CHECK HARNESS CONTINUITY (REAR POWER WINDOW SWITCH RH)





1. Turn ignition switch OFF.
2. Disconnect main power window and door lock/unlock switch and rear power window switch RH.
3. Check continuity between main power window and door lock/unlock switch connector (A) and rear power window switch RH connector (B).






4. Check continuity between main power window and door lock/unlock switch connector (A) and ground.





Is the inspection result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - Repair or replace harness.
4. CHECK HARNESS CONTINUITY





1. Disconnect BCM and rear power window switch.
2. Check continuity between BCM connector (A) and rear power window switch connector (B).





3. Check continuity between BCM connector and ground.





Is the inspection result normal?
YES - GO TO 5
NO - Repair or replace harness.
5. CHECK REAR POWER WINDOW SWITCH
Check rear power window switch. Refer to LH Only Anti-Pinch-Sedan.
Is the inspection result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - Replace rear power window switch. Refer to LH Only Anti-Pinch-Sedan.