LH & RH Front Anti-Pinch-Sedan

POWER WINDOW MOTOR


DRIVER SIDE : Description

Door glass moves UP/DOWN by receiving the signal from power window main switch.





POWER WINDOW MOTOR


DRIVER SIDE : Diagnosis Procedure

Regarding Wiring Diagram information, refer to Power Window System - With Left Front Only Power Window Anti-Pinch.

Front Power Window Motor LH Circuit Check
1. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL





1. Disconnect front power window motor LH.
2. Turn ignition switch ON.
3. Check voltage between front power window motor LH connector and ground.






Is the measurement value within the specification?
YES - GO TO 3
NO - GO TO 2
2. CHECK HARNESS CONTINUITY





1. Turn ignition switch OFF.
2. Disconnect main power window and door lock/unlock switch and front power window motor LH.
3. Check continuity between main power window and door lock/unlock switch connector (A) and front power window motor connector LH (B).






4. Check continuity between main power window and door lock/unlock switch connector (A) and ground.





Is the inspection result normal?
YES - Replace main power window and door lock/unlock switch. Refer to LH & RH Front Anti-Pinch-Sedan. After that, refer to LH & RH Front Anti-Pinch-Sedan.
NO - Repair or replace harness.
3. CHECK POWER WINDOW MOTOR
Check front power window motor LH. Refer to LH & RH Front Anti-Pinch-Sedan.
Is the inspection result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - Replace power window motor LH. Refer to Removal and Installation. After that, refer to LH & RH Front Anti-Pinch-Sedan.