Removal And Installation

CENTER CONSOLE ASSEMBLY


Removal and Installation


REMOVAL
1. Put selector lever in [N] position. (CVT models)
2. Remove shift knob. (MT models) Exploded View.
3. Remove front console cover.
- Remove front console cover with a flat-bladed screwdriver (A) wrapped in a tape.
- Pull up front console cover.






Broken Triangle : Pawl

4. Remove mounting nut of center console front side.
5. Remove rear console cover.
- Remove rear console cover with hook and pick tool (A) as shown in the figure.
- Pull up rear console cover.






Broken Triangle : Pawl

6. Remove mounting nuts of center console rear side.





7. Insert a deep-well socket wrench (A) to rotate adjusting nut to loosen cable sufficiently. Component Tests and General Diagnostics.
8. Remove console mask.
Pull upward to console mask fixing clips from center console with remover tool (A).





Broken Circle : Clip


9. Lift up center console assembly back side, and then remove center console assembly.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
After installation, adjust the parking brake lever stroke. Component Tests and General Diagnostics.
[Krom]