Diagnosis Procedure

DOOR REQUEST SWITCH


Description

Transmits lock/unlock operation to BCM.





DOOR REQUEST SWITCH


Diagnosis Procedure

1.CHECK DOOR REQUEST SWITCH INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect malfunctioning front door request switch connector.
3. Check voltage between malfunctioning front door request switch harness connector and ground.





Is the inspection result normal?
YES - GO TO 3.
NO - GO TO 2.
2.CHECK DOOR REQUEST SWITCH CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between malfunctioning front door request switch harness connector and BCM harness connector.





3. Check continuity between malfunctioning front door request switch harness connector and ground.





Is the inspection result normal?
YES - Replace BCM. Removal And Installation.
NO - Repair or replace harness.
3.CHECK DOOR REQUEST SWITCH GROUND CIRCUIT
Check continuity between malfunctioning front door request switch harness connector and ground.





Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace harness.
4.CHECK DOOR REQUEST SWITCH
Component Inspection.
Is the inspection result normal?
YES - GO TO 5.
NO - Replace malfunctioning front door request switch. With Intelligent Key System.
5.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END