Inspection Procedure

MEMORY FUNCTION DOES NOT OPERATE


Inspection Procedure

1.CHECK MEMORY FUNCTION
1. Start the engine.
2. Set the temperature to 32�C (90�F) by operating the temperature control switch.
3. Press OFF switch.
4. Turn the ignition switch OFF.
5. Turn the ignition switch ON.
6. Press AUTO switch.
7. Check that the set temperature is maintained.
Is the inspection result normal?
YES - INSPECTION END
NO - GO TO 2.
2.CHECK POWER SUPPLY AND GROUND CIRCUIT OF A/C AUTO AMP.
Check power supply and ground circuit of A/C auto amp. Diagnosis Procedure.
Is the inspection result normal?
YES - Replace the A/C auto amp.
NO - Repair or replace the malfunctioning parts.